Homemade Spot Welding Machine with Power Control . How to Make a Spot Welder.. Step by step tutorial how to make a Spot Welder.
Use old microwave and vacuum cleaner
Electric Circuit - https://drive.google.com/open?id=0B1O1fbFGJYSac0NzMUdwR1M0S2M
Resistance spot welding (RSW) is a process in which contacting metal surfaces are joined by the heat obtained from resistance to electric current.
Work-pieces are held together under pressure exerted by electrodes. Typically the sheets are in the 0.5 to 3 mm (0.020 to 0.118 in) thickness range. The process uses two shaped copper alloy electrodes to concentrate welding current into a small "spot" and to simultaneously clamp the sheets together. Forcing a large current through the spot will melt the metal and form the weld. The attractive feature of spot welding is that a lot of energy can be delivered to the spot in a very short time (approximately 10–100 milliseconds). That permits the welding to occur without excessive heating of the remainder of the sheet.
The amount of heat (energy) delivered to the spot is determined by the resistance between the electrodes and the magnitude and duration of the current. The amount of energy is chosen to match the sheet's material properties, its thickness, and type of electrodes. Applying too little energy will not melt the metal or will make a poor weld. Applying too much energy will melt too much metal, eject molten material, and make a hole rather than a weld. Another feature of spot welding is that the energy delivered to the spot can be controlled to produce reliable welds.
Tags: Homemade Spot Welding Machine with Power Control . How to Make a Spot Welder., how to, microwave, transformer, amp, arc, current, spark, spot welder, Spot Welding Machine, homemade spot welder, power control